🌡️ Mishimoto MMRAD-G35-03 Performance Aluminum Radiator for Infiniti G35 2003-2007: Enhanced Cooling and Durability Review

. Received quickly, there was damage, so I hope Amazone can test like new before selling. Also not suitable as you have to modify the fans, brackets but once you get this great product.

Good product. The box was already open when received. The brackets for attaching the top of the box are gone. The heatsink wrap was still secure and there was foam in the box to hold the heatsink in place. In addition, this product was delivered quickly! And everything looks fine

Ok, I'm very disappointed with that. I tried several times to contact Mishimoto but no response. I took this cooler to two very experienced mechanics. in Arizona, and to this day they can't install that radiator on a 2006 G35 A Coupe with an automatic transmission. I really wanted this as I spent $350 on it but apparently I only took $350 and all I have to show is a giant piece of aluminum so Mishimoto if you could get it right I really would appreciate, thanks, i can send you photos and…

Well I haven't had a chance to see how the radiator works because I decided to buy mine used to try and save a few bucks. And well, you know how to do it. It arrived, I saw the damage it had received from the previous owner when he installed it by punching two holes in it. Then water poured out of the bolt hole, now that it happened I suspect he stuck a bolt in too long and blew through the tank. Huge waste of time if I had only paid to buy a new one because I need it now. Now I have to wait…

It has been a year since I installed this on my 2006 Infiniti G35 with automatic transmission. My stock radiator failed at the worst possible time and I had to work on it at night as it was my daily driver. I remember reading all the reviews and it took me at least 3 tries to get this in my car. I had to use a Dremel on some parts, and not too much so it could handle the weight of the higher capacity (almost half a gallon more antifreeze). It works fine now, but it was hell getting it to fit…

As with the other two reviews you will need to take your old rubber feet (part number: 21508-10V00) and cut them off at the top. Here's something else I found: basically everything doesn't fit this cooler anymore. - The radiator is thicker than the original, so the condenser is pushed forward more - After installing the condenser into the radiator grooves on the radiator, the condenser and radiator openings do not match. The capacitor holes are raised too high - the top heatsink latches on the…

After reading other complaints about the rubber feet not fitting properly, I carefully ordered from Revain, then contacted Mishimoto with the serial number of the product supplied and was assured that this was their latest "rework" and right away without nothing would need to be configured prior to installation. After 12 hours of installation and tuning, this is without a doubt the worst installation of any part I have installed on my car. I'm not sure what QC or R&D Mishimoto put into the…