This base fits my situation perfectly. Assembly was fairly easy, but I would like to add the following: 1. For some reason there is grease on the two pivot plates. Don't wipe it.2. Step 2.d. (and duplicate 2.e) uses lock washers and nuts. There were no lock washers but the nuts were lock nuts so there was no problem.3. Step 8 says to drill 1/2 inch holes in the plywood to install the screws. Some people noticed that they used a 3/8" drill bit instead and consequently some had alignment issues. I played with it too. Save time and just follow the instructions.4. After drilling 12 holes, determine the best corner placement by laying out plywood and corners near the instrument to be supported, taking into account factors such as the direction you typically plan to move the instrument, foot pedal accessibility, foot pedals , to trip over, etc. After my first try, I did this and found that the second location shown in the Build Examples section works best for my situation. I hope this helps you with the build process.
Maximize Your Power Tools With Energup Upgraded 12V 3000MAh Lithium-Ion Battery For Milwaukee M12 - 2 Pack
52 Review
Set Of 2 VARSK Contour Gauges With Light (5" And 10"), Wide Shape Duplicator Profile Tool For Accurate Measuring Of Corners, Woodworking Templates, Tiles, And Laminate
45 Review
Energup Li-Ion Replacement Battery Pack For Black Decker Versapak VP Series With 2-Port Charger
43 Review
Energup 3.0Ah 40V MAX Replacement Battery For Black+Decker 40V LBX2040, LBXR36, LBXR2036, LST540 & More
40 Review
Sharpen Your Tools With HTS 101I0 6Pc 180Mm / 40-600 Grit Diamond Flat File Set
28 Review
140Mm/150 Grit Diamond Needle File Set - 10 Piece HTS 101E0
30 Review
Get The Job Done With DURATECH Flex-Head Ratcheting Wrench Set - 12-Piece Metric Set With Rolling Pouch
28 Review
JAKEMY 69 In 1 Precision Ratchet Screwdriver Set For Household Repairs And Maintenance - Magnetic, Rotatable, And Disassemble Tool Kit For Furniture, Cars, Computers, And Electronics
29 Review