Review on Robot vacuum cleaner Ecovacs DeeBot OZMO 900, white by Ewa Komorowska ᠌
Return my money! Disgusting product and poor quality.
7) The radar is for marketing purposes; it is solely utilized for the picture, and it is in no way used to guide the vacuum cleaner about the room in any way. He simply knocks his head against everything in order to establish where you are allowed to drive and where you are not allowed to drive. 8) The head-mounted obstacle sensor is not very sensitive to its surroundings. The vacuum cleaner is able to move chairs, cartons, and other items that are not particularly heavy with relative ease. Because of this, its orientation in space is disrupted. Take, as an illustration, a chair in a kitchen that is located outside of the red zone. After rocking it back and forth for ten minutes, he will finally acknowledge that he is at a loss for what to do next. In addition, you will be required to remove the chair before continuing with the cleaning process; otherwise, it will become caught in it once more. 9) Marketing also includes tasks such as mopping the floor. They merely unscrewed the water container and screwed it onto the vacuum cleaner, despite the fact that the vacuum cleaner was not at all designed to be used for wet cleaning. Dust adheres to all of the interior processes and parts due to the presence of moisture. Because of this, the performance of the vacuum cleaner is impaired, and as a result, it will be very challenging to clean anything. After giving wet cleaning a go for a couple of weeks, during which time the dust physically bonded into a thick film in some areas, I was forced to soak it. 10) The water bottle is a highly bothersome piece of equipment to use. It is impossible to wash and clean it in the usual manner, and even the water cannot be entirely drained from it so that it can be dried. 11) If you clean every day, then once a week the vacuum cleaner will start behaving strangely and go berserk. This happens if you clean every day. You run the risk of losing the base even though you're standing on it, or starting ignoring all of the red zones. It is necessary to reload. The only scenario in which cleaning can become rapid and attractive at the same time is one in which all of the rooms are completely vacant and there are no thresholds between them. In other circumstances, you will be unable to totally avoid experiencing pain and suffering. ps This picture illustrates how to get around the red zone (which includes everything it goes around at varying distances), the Bermuda triangle, and the situation in which it became tangled in the dryer.
- If aesthetic appeal and the quality of the materials used can be considered virtues, then they should be.
- It is impossible to identify everything that is wrong with it due to the fact that it has so many problems that are directly linked with the cleaning function. If you try to mix them, however, this vacuum cleaner will not be able to clean without your constant monitoring. If you examine attentively, you'll see that in the end, it will be easier, quicker, and cleaner to run with a regular vacuum cleaner. 1) If he got stuck somewhere, for example, he ran into the leg of an ordinary dryer, got tangled in a chair, stumbled upon a threshold, etc., then you need to wait until he gets enough wind up there and reports that he is stuck, which can sometimes take up to five minutes. In other words, if he got stuck somewhere, you need to wait until he gets enough wind up there and reports that he is stuck. If you assist him in any way, he will start to feel drawn to this location like a magnet, which will bring about all of the associated negative effects. 2) During the cleaning process, you cannot simply add a red zone to a troublesome area to prevent it from climbing in areas where it is not required to do so. After the room has been cleaned. It is in your best interest to hold off until he has completed what he is working on, and I will not explain why. 3) Even if red zones can be added, there is not the slightest bit of logic behind how they are processed. It is possible to approach several zones in quite a different manner each time. For instance, although he can get within 20 centimeters of her at the moment, the next time he calls into her, this renders the process hard to fine-tune. 4) There are times when red zones are ignored in general. As the zones overlap one another, there will be complications with the processing of the information. 5) If you place two red zones next to each other, you can create a Bermuda triangle in the room. When the vacuum cleaner runs into the Bermuda triangle, it will begin to spin rapidly until either the charge on it is depleted or it is removed from the area. It might sound silly, but it actually happens fairly frequently that you have to move anything in order to alter the combination of red zones and free yourself from the trap. 6) If you rearrange objects or furniture, even in a minor way, the vacuum cleaner could lose the map with all of the red zones that you have painstakingly set up over the course of several weeks, and then you would have to begin the process all over again.
