Review on Vibrant 40-Spool Polyester Embroidery Thread Set For Brother, Janome, Singer, And More - 500M Spools, 40Wt - 4 Sets Available At Threadart! by Darren Boogie

These threads made a decent starter set. They're relatively inexpensive and you get a fair number of colors so you can buy larger spools of the ones you need more often.I did have a few issues with the spools themselves but found easy workarounds (or maybe it's just standard practice, I'm very new at this).-Needles breaking because the thread comes off and twists around the spool holder: To fix this I pointed the spool so the top faced the feeding direction horizontally. My machine also allowed me to put the spool at a (very slight) angle upwards. This seemed to help prevent a lot of the needle breaks.-The sticker on the top was annoying. It either kept coming off or I had to crease it so far in I couldn't read the number anymore. I finally ended up just using a sharpie to write the number on and removed the sticker altogether.-Several of the spools didn't lock entirely. One side locks but the other side will just pop right back open again. Most the time the part that locks will keep the tread in place for the most part, but it isn't as sturdy.Overall though, these are small annoyances. To my inexperienced eye, the threads seem to be of acceptable quality and (like I said before) this has been a good starter set. I'd recommend it to a friend and will likely buy at least one other set in the future.One slight request would be to include the specific color numbers included the description of each set. This would make it easier to decide which set to buy next.