Review on 💦 Enhanced Performance Radiator VH021568 by Koyorad by Brian Nelson

I installed this on a 350Z Twin Turbo with 2 Flexlite 4000cfm fans. Immediately lowered the temperature by 20-30 degrees. You need to know that you can ONLY use the Koyorad heatsink cap and the temporary connector location on their blueprint is different from the actual location. The picture shows the hole on the intake side under the upper radiator. . Hose; However, it is actually at the top of the exhaust side. So if you are installing a temperature switch, you're better off using a probe that is 20 degrees cooler than what you would use on the hot side. Drain Plug 10mm x 1.0 FYI. flimsy for installation although I epoxy 2 brackets to hold the fan assembly on top instead of bottom. Also, you need to be aware that the bottom hose on the stock radiator is about 2 inches shorter because the outlet is shifted about 2 inches to the side from the stock. The stock hose ended up about .010 away from the AC pulley, so I made steel tubing for that side to avoid a possible cut and leak disaster!