I came in and it doesn't fit my Ford, maybe it's my fault for not doing a little better research. So I had to order another cover for my Ford and it didn't fit without machining the cover as it was too large in diameter to fit the master cylinder bore. I just replaced the master cylinder and most likely it was from China and the problem could be there and not the pumping. After modifying the cap and it fitted fine without the o-ring, I put the o-ring on and was still having trouble fitting the cap into the tank as the o-ring did not fit as the tank was sharp Edge around the hole where the cover goes. So I had to deburr the tank and taper the o-ring first. Still no joy as the "O" was too big, I had set the "O" and chose the smaller "O" and success. I also added a quick disconnect to the hose so I can switch the hose from one to the other with no fuss. All in all I ended up really liking the prime pump and as the caption says I couldn't have done the job in my RV without it. After all the work I have a very good instrument that I will enjoy for a long time.
🔧 BMC Universal Vacuum Pump: Handheld Brake Bleeder Kit Ensuring Efficient Auto Service & Food Canning with Brake Bleeding Tester Set
9 Review
Wostore Double Flaring Tool Kit with Copper Line Tube Cutter: The Ultimate Solution for Precise Flaring!
35 Review
🚗 Motive Products 0100 European Power Brake Bleeder Kit - Efficient Brake System Maintenance for European Vehicles
9 Review
🔧 Adjustable Engine Cylinder Hone Tool - EWK 1-1/4 to 3-1/2 Inch 3 Stones, Deburring Piston Honer with 220 Grit
9 Review