Review on 🚀 Boost Your RAM/DODGE's Horsepower with the K&N Cold Air Intake Kit: High Performance Upgrade for 2019-2020 (1500) by Glen Needham

Result and installation Result --- 2020 RAM 1500 5.7 Etorque, cabin sound with "light foot" hardly perceptible. The wide-open throttle sound has an obvious low-pitched growl, as you'd expect - an obvious improvement in airflow. I've only done 200 miles and the mileage seems to be about 0.5mpg better, maybe a little more - that's what I was hoping for. When I'm flat out on the Autobahn, I'm not sure if I'm accelerating faster, but the sound definitely amazes me! I think the power increase and mileage increase is a definite win. Installation is very simple, but there is always something that can be messed up. In my case, when lifting the factory airbox, I had broken off 2 of the 4 plastic pins that the box sits on. I watched a video of this and it felt like people were kind of "struggling with this" - so for you, pull forward a bit, then back, then repeat, it should work without those pins to break. I used a zip through the resulting holes to secure it with no problem. Also note that in the previous review the system is rubbing against the Etorque motor wiring harness. See my photos, everything works. The wiring to the temp/airflow sensor is a bit tight but still fine. It also mentions a 90 degree NPT threaded connector, just finger tight, no wrench required, and note the orientation in the instructions, which is the same as the hose. Everything is very easy to do. Great first addition to the truck!