Review on 🔧 Upgraded Rear Coil Spring Replacement Kit with Shocks for 2003-2011 Ford Crown Victoria - Elite Suspension 65993c by Chakravarthi Ladner

I installed this kit on my wife's 03 Town Car and it fits perfectly. I'm an auto technician (37 years old) and I want to add some installation points. Remove the rear brake calipers (leave them hanging) and disconnect the ABS sensors from their brackets before installing the springs. Otherwise the brake hoses and sensor lines can be damaged. Also, you only need to remove the stabilizer bar from the axle, not from the front mounts. Simply detach from the axle. To remove the air line from the bags, simply use long needle nose pliers and pull the tubing out of the bags. To get the axle low enough, remove the top link from the axle and LOOSEN the front link bolt on the frame. This greatly simplifies the installation of the connector during reassembly. Finally, to turn off the system warning light, remove the lower instrument panel cover under the glove box. The module is located next to the glove box. It has two connections. Once grey, once black. Cut off the dark green/white wire and the white/purple wire on the gray connector. This turns off the power supply to the module and the signal light. Feel free to ask me your questions.