Review on 🌬️ Enhanced CF10388 FRAM Fresh Breeze Cabin Air Filter with Arm & Hammer Baking Soda for Nissan Vehicles in White by Patrick Ceo

Significantly cheaper than at the dealership on the Nissan Titan Truck (38.00 without installation). Installation is easy. Remove the glove box by pulling the two pins out of the lower hinges of the glove box. They're hard to see unless you turn on the lights and duck under the dash a bit. Once you find them for the first time, you can "touch" them since you know where they are. Let the glove box hang on the wire holder or remove it if you like. You will need an 8mm socket to remove the airbox cover from the firewall. Remove the airbox door and slide the first filter in until it stops. Then slide it aside to make room for the second filter. They sit next to each other. Note the air flow arrows on the filters. Replace the airbox cover and glove compartment and you're done. If you have a Titan, the only ones that come with cabin filters from the factory are the LE trim models, so don't panic if the airbox is empty when you first open it. After installation I noticed that the air in the truck was much fresher. With the filter installed in the spring, there was no allergy. However, be aware that after installation you may notice a reduction in airflow into the heating ducts. The truck had a fan blaster when the truck didn't have filters. With the filters it's just average. It's a good compromise to keep dust and dirt off the truck.