I have purchased a WEN 5932 orbital sander which can be used in manual mode or mounted on a table with the brackets that come with it. While the sander and included sample bushings work great, the additional grit bushings I ordered were too long for the spindle drum and I had to cut off about 1 1/2 inches to fit. The problem was the loose fit. The bushings slipped and pulled away from the spindle no matter how hard I tightened the locknut and no matter how carefully I installed the washer. This problem did not occur with the original sample bushings that came with the grinder, they fitted snugly. I didn't want to return them because I had to finish a job that required good handle bushings, so I put tape between the spindle and the bushing to hold the bushing in place while sanding.. Disappointed to see WEN's own product is not suitable for your power tool.
πͺ Dremel 83322 Grinding Wheel with Silicon Carbide for Enhanced Performance
4 Review
π οΈ Efficient Sanding with WEN DS164 20 Piece Sanding Presses: A Complete Solution for Your Sanding Needs
3 Review
Enhance Your Sanding Efficiency with ABN Aluminum Spindle Sanding Sleeves
3 Review
πͺ Forney 60053 2-Inch Mounted Grinding Wheel
3 Review
π¦ A16010600Ux0647 Abrasive Sanding Sandpaper Mandrel" -> "High-Quality Abrasive Sanding Sandpaper Mandrel (Model A16010600Ux0647)
3 Review
Merit M 9 2 5 Extra Shank Length Cartridge Diameter
3 Review
π© Simpson Strong-Tie PMANDREL75 RC Drive Mandrel
3 Review
Effortless Sanding with Dremel EZ407SA Drum Sanding Mandrel
3 Review