Review on Water Cooling System for Arctic Liquid Freezer II 420, Black/ARGB by Janis Liekmanis ᠌

Installed in Fractal Design Define R5 Case I will describe the installation process a little, because there is a lot of information on the Internet that it does NOT fit into this case. Installed on top. Removed screws and baskets. I bent the wires from the front panel under 90 'and put them down along the vertical rack, and in order not to interfere, I fixed them with a coupler He brought dropsy into the case and fixed it with 4 medium screws with an offset to the left door (to the left, if you look at the front part) The body holes do not coincide with all the holes on the LSS; I did not drill the body. As a result, it stands on 6 screws, holds firmly. Key points cited by people who have been asked: “Will it fit into the Define R5?” - this is the thickness of the radiator with installed coolers (somewhere around 65mm), that they say it will rest on the RAM, or on the radiators of the VRM zone, - everything is ok with me. There is even a gap of 0.7-1cm somewhere. I had to tinker a little with the back wall when I started the cooler, which was blown out. Cooler Ty-147b, not the thinnest. But I got in, everything is ok. Motherboard MSI z370 krait gaming, RAM - Corsair Vengeance LPX (it seems). Its size is 38mm. I hope this turns out to be useful to someone. I searched for information myself, but did not find successful installations. As a result - everything is OK, not perfect, but without ing.