Review on 🚽 Valterra E1003VP EZ Valve 3-inch Electric Waste Valve System, Black - Enhanced for SEO by Collin Donahue

I bought this for the rear black tank of a 2019 Keystone Bullet 330bhs. I broke a cheap aluminum handle and decided to take the opportunity to upgrade it. There were some problems with the installation. the length of the control cable can be longer. routed the cable up through the stove bushing and mounted the control panel outside the rear bunk. I measured decently but ended up only having about 1 inch of slack in the cable. In order for the hand train to be available I had to modify the underbelly by cutting and gorilla gluing the 1 inch styrofoam insulation I am installing. After installation, the base of the solenoid valve assembly protruded below the level of the black coroplast, but when I replaced the coroplast I left enough excess to close the unit, excluding the handle when the valve is in the open position. A simple notch allowed this valve to be fully opened. And I intend to tape this valve loosely when traveling. Another small issue was finding an acceptable 12V DC power supply. Routing the ground wire to the frame through the same furnace duct opening. All these little problems were easily overcome and the electric valve works like a charm. We recommend.