Review on 🚲 Enhance Your Cycling Comfort with Velo Seat Clamp for Standard Rail Saddles by Darren Cole

Most people fit a saddle and not a rack on their bike. Place the rack on the bike to install it as you will need a lever to place the seat and pivot it onto the base. Then place the seat base on the top tube post; You have to do this first to get the teeth in the tube: if you do this afterwards you will think that the diameter of the base is too small to fit in the tube. Then take the 2 inner loops of the saddle and line them up with the saddle; while wedge around the main loop. As you align the hinges with the base, they shrink around the tube and bite into it; You may need to get a rotary pin and use that to line up the holes. Do this with both holes until they line up and the axle can easily fit through both holes. Then adjust and pivot the seat angle. Finally, add the nuts and tighten them evenly with two wrenches. If you don't follow this, you will find that the diameter of the saddle clamps is either too large or too small at some point in the installation. 3 stars for easy installation. With this installation method, you can't just move the saddle forward or backward, and you have to do a full installation from the start.