Review on Nilight NI FH02 Circuit Adapter Warranty by Seth Bushey

I have received these items and used them as they were intended to be used. I wanted to add connections instead of just putting the wire in the fuse holder and then reinserting the fuse to hold the wire in the fuse box. However, they did not connect as they should. After a lot of time had passed I checked to see if I had 12 volts in the fuse box with no voltage from the new terminals. I found that the butt connector on the new cable adapters was crimped before the wire was stripped and of course this prevented the connection from working properly. I need to check the rest of the connectors to make sure they are the same in order to use the connectors. I need to remove the bump clamp that came with the adapters, strip the wire and install a new bump clamp. Continuity must be checked to determine if connections can be made or if there is a problem with the fuse holder that connects to the fuse adapter.