Review on DeatschWerks 6 1000 FRB Pressure Regulator Adjustable by Chris Floyd

This is an amazing quality fuel pressure regulator. Please pay attention to the description on Amazon. It states that you need an AN6 bullet on all sides. It cost me over $30 as I only needed one. Here's what you need: two (or 3 if using dual feed) ORB-AN8 bis (AN8 or AN6) depending on your fuel hose application. One ORB-AN6 per AN6 for fuel return. Please refer to the illustrated instructions I have included. You also get a bracket to attach it to. This new design is very compact and high quality, I like it. It comes with a fuel gauge adapter. I also bought a fuel pressure sensor from this company. I don't have an allen wrench to remove the plug for the ORB feed inlets. But 10mm and 8mm didn't fit, so I'm assuming you'll need a 9mm allen wrench to remove the plugs and install the new fittings. You can replace the gauge adapter to change the direction of the vacuum line to the left. or to the right. This line is very important, do not skip the setting. Requires 5mm or 3/16 inch tubing. I hope this was useful to someone as there are no reviews until people buy and share their thoughts. If you can click the 'Useful' button so people don't waste money buying things they don't need. Revain's description is wrong.