Review on 🔦 JDM ASTAR 2000 Lumens 360-Degree Shine LED Bulbs For Backup Reverse Lights, Xenon White - Enhanced Visibility with 921, 912 90-EX Chipsets by Dean Gomatham

Installed in my Kia Rio 2012 hatch, reverse light. Live in an area with no light pollution. Incredible brightness and clarity. These cars have almost no vision when reversing, but these lights are similar to high-beam mini headlights in the rear. In this case, the only drawback was a free landing. They rocked. On the Kia Rio Hatchback 2012, the reversing lights are built into a housing integrated into the tailgate. After (approx.) 5 opening/closing of the hatch they fell out. How, out. As in, in the light case. To remove this part of the taillight I removed the inner fairing, disconnected a connector and removed 3 x 10mm nut heads. After the assembly was removed, I spent an incredible amount of time shaking the taillight assembly until the spatula on the end of the bulb was in place and I was able to pull it out using 8 inch needle nose pliers. After that I connected it again. , and once the entire assembly was removed I added crazy glue to the places where the base of the lamp makes contact with the plastic socket. There are some "ribs" that should grip the bulb. Here I used crazy glue. It's cold in here right now, so I used the store's lamp to heal it faster. I will upload a photo. However, having said all that, I would recommend and buy another kit for my wife's 2016 Sedona van. It's worth it!