Review on 📦 Homydom 3-Level Lumber Storage Organizer by Brandon Addison

As mentioned in many of the comments, in order for the racks to reliably support the weight that these racks can support, you need to buy screws. I bought 3" 5/16 anchor bolts for 52 cents each from Ace Hardware. Get 4 anchor bolts per pack (I bought 8 for my 2 pack for example). Installation Notes 1. I found the studs about 48 inches apart. line (6' level) where the bottom of the supports should be 3. Mark a vertical line (2' level) 16" above the bottom mark 4. Mark and drill a pilot hole for the mounting screws (13/64 ) The holes in my bracket were 3 and 14 5/8 from the bottom. 5. Use an impact tool to secure the fasteners. Be sure to put a washer (called a spacer in the instructions) on each mounting screw. 6. Install levers with pins and clips Check lever angle if critical for your use. Tape measure 5. Drill and 13/64 bit (7/32 can be used) 6. Impact drill and 1/2" deep socket I talked to Revain, got a $15 credit, and bought a 1 1/2" pencil for $1.45 at Ace Hardware 2. The specs mention that the levers tilt up slightly; three of me (ie a quarter of the hands) didn't have it. The angle wasn't critical for the wooden stock, so it wasn't a problem for me.