🔧 High-Performance Swivel Caster Creeper Service Review

These wheels are easy to fit and are used as undercarriage replacements. The first time I put them under the car and folded them, the plastic centers broke and the cleats fell off.

I measured carefully and required 2-1/2" diameter rollers. They looked like they were perfect, but they are actually 3 inches in diameter. I didn't check the quality at all as they weren't what I ordered. return as soon as possible.

I did not receive the product in the picture. The metal mount that curves around the wheel to protect the person on the glider from being pinched is not the mount on the resulting wheels. The bracket on the wheels I received is straight and much shorter than pictured. upset.

Wheels are great, buy cheap slot nuts and tighten the thread. The nuts are really cheaply made and are junk. I ordered 3 sets for my vines and they were missing all the nuts for a week. I ended up using wheels on my filing cabinets with a standard nut and they worked for that. Slot nuts break on you so I won't buy them again.

They are about 1/2 inch taller than the original wheels but no problem if you replace them all. They seem very sturdy and I'm a big guy at 220 pounds. and 6ft 1in, and if they fit me, they should fit most people. The original wheels started falling apart after 20+ years of use and getting this from them will make my day better. I put a special grease in the bearings and try to top it up every year.

Great replacement! On a cold morning, all 4 wheels of my SnapOn rocking chair fell apart. After more than 20 years I can understand that. I wouldn't pay for any other place! These are the perfect replacements! Judging by all the other reviews, the old ones will be your biggest problem. Lots of WD40 and a heavy vise will help. You can round out the holes with a sharp 3/8 bit. The new insert nuts are slightly larger. Good product! Fast delivery!

I replaced the wheels with a cheaper glider that I have. I've looked at many vines looking to replace the inexpensive unit I have, but didn't want to spend the money. I had to drill through the frame on mine to get them to work, but they are larger than the standard units and now my creeper rolls across the ground much easier than before. You may need to adjust your vine, but if you're a little forgiving you can get it working and get a better vine for a few bucks.

These are high quality reels, the best I have found in the last three years. The bracket/frame is much stronger than a regular reel. I have attached a photo of my previous reel and the new reel. My old skates got stuck in the vine frame when turning, but not these. They are very durable, won't scratch hardwood floors, and slide easily over concrete driveways. I had a £275 assistant loan me my creepers and the reels still rolled smoothly. A tip is to lubricate them with CRC lube with PTFE, which

The wheels I received are of much better quality than the photos. In the picture the casters are very similar to the casters on an inexpensive stool I have. The original reels look like they are pictured on the product page so I thought they should fit as that is all that is available. When I received these new videos, the update was impressive. The first thing that struck me was that the reel body was a completely different (much better!) shape. Higher quality wheels. The bearing is larger and

1. Screw cap with cheap metal hex key. I peel off each of them by putting them on. I got them pretty tight with that. I hope I don't have to remove them anytime soon. I had to add a washer for the hex bolt on top because the shank was a bit long. It was easy to fix. So overall these wheels are great. Yes they are plastic but they were the same ones that were on my old Mac tool my stepdad gave me. I used it tonight. The ride was smoother than the original Mac Tools wheels. I filled the bearings…