Review on 🔌 gofanco Prophecy 1x2 HDMI 2.0 Splitter 4K 60Hz HDR USB Powered Auto Scaling Wall Mount, YUV 4:4:4, 3D, HDMI 2.0a, HDCP 2.2, EDID, 18Gbps, Low Heat, 2 Port 1 in 2 Out (PRO-HDRsplit2P-LT) by Abdullah Huan

I bought this splitter (PRO-HDRsplit2P-LT) for my Xbox One X. I use it to split the signal to my TV (TCL 55s405) and my AV receiver (Yamaha rx-v377) because neither can transmit video and audio well enough for the other. I was expecting 4k x 2k @ 60Hz for the TV and 5.1 uncompressed PCM for the receiver. I connected 3 brand new HDMI cables to the splitter and everything worked great. However, now after a week and a half, the TV says that there is no signal on HDMI, and the same with sound. My first thought was to replace the 3 HDMI cables and I did but got nothing so I unplugged the HDMI cables from the splitter and tested them directly from the Xbox and TV/receiver and they all worked without the splitter. I also tested my receiver and TV with other devices and they worked without the splitter so I started playing around with the EDID switches to see if that fixed the problem but the TV still says no signal. Both EDID switches were previously off as everything was working fine. All HDMI cables are in good condition and the splitter itself is the same as in the box.