Review on Vepagoo Compatible 2003 2008 Liftgate Supports by David Estevez

These gas shock absorbers for the 2007 Nissan 350Z were very easy to install. For comparison. He doesn't move or flap his fingers! Replace one side at a time.3. Remove the (2) 10mm screws from one side of the car mount with a 10mm head and once loose move them into the rear hole to avoid damaging the car's exterior! 4. Use a 12mm wrench to remove the ball joint from the tailgate assembly and carefully remove it from the vehicle. Don't scratch your car! 5. Wipe down the car mount holes and tailgate ball stud entrances to remove dirt buildup from years of use. 6. Install the gas strut brackets using Nissan Genuine 10mm bolts as these are of better quality than those supplied with the gas struts. Using the (2) washers provided, screw in the tailgate mounted ball assembly and tighten with a 12mm socket wrench, but don't over tighten!8. YOU ARE NOW READY TO MAKE. THE EASIEST PART OF INSTALLATION! Simply slide the female part of the gas strut onto the male ball part of the mount and it will be. breeze! Further. Slide the female end of the shaft onto the tailgate male ball and. CLICK. and the end of the shaft are about 1/4 inch adjustable by screwing or unscrewing the parts that hold the female ball. printed on the packaging of the gas pressure absorber. DO NOT BUY CHEAPER GAS SHOCKS AS THEY ARE NOT SO EASY TO INSTALL! Problem. but still use 2 with hocks. lol☺UPDATE 5/5/2020These gas springs are really strong and will buy again if they ever go bad!