Review on 70mai dash cam midrive D01, black by Alexander Bambang ᠌

As for fasteners: 1) the intermediate film does not rest on silk-screen printing, and the whole point of buying this BP for me was to free the view, when the fastening screw is fully tightened, the farthest edge from the fastening (left from the driver) goes up and down up to half a centimeter, 3) after peeling off the film and gluing without it, the adhesive tape does not hold well, could, like some other manufacturers, put in an additional kit. As a result, my left edge is caught with another double-sided tape for mounting the mirror. Soft: I have voice acting in English (i. E. the global version), voice commands were tried to be given by a native speaker - they do not work. Taken from the instructions found on the Internet, they could have been brought to paper, and even better reproduced as test ones from the program. There are few settings, they are translated into 2022, but they are unintelligible, for example, video: "normal" and "finished" - guess from 3 times what is what. One physical button is a common solution in this class, I would prefer 3: on, record, wi-fi, it would be more convenient for me. The length of the cord was just enough for hidden wiring through an elastic band, literally pulled in, though I always make a small loop around the mirror mount so that the fallen-off VR does not break when peeling off and does not break the panel in the car (it helped this time too). The previous BP had forty centimeters still in stock on the cord. During the day, the shooting is fine in terms of sharpness, but the picture is very overexposed, the numbers are distinguishable from two meters, if you look at some non-specialized player, I haven’t traveled at night yet. PS For a couple of weeks of driving, the fastening screw is steadily unscrewed. There was no thread lock at hand, I put a small grower - the problem was gone.