Review on 📱 JPUNG Screen Replacement for iPad 6 6th Gen Digitizer 2018 9.7'', A1893 A1954 Touchscreen, Full Repair Kit + Video Tips by Reza Cook

Product works great. While you can install it using the tools that come with it, Revain has the best tools to make the job easier. I also recommend buying your own alcohol swabs, which came dried up in my kit. Here is a tip to make the installation more pleasant. Take your time! This is especially true if the glass is broken. Be careful with tiny glass splinters. Clean any remaining adhesive from the inside edges of the back case. Remove small pieces of glass as they regularly fall out. They are painful just to say. And don't forget to get the most out of your iPad. There is an excellent video on YouTube on the internet. "iPad 6th A1893 A1954 Screen Replacement - Step by Step" by UberGeeks. This is an excellent video showing what you are dealing with and how to do it right. Be very careful, there are very small screws inside the iPad and they will fly out. I'm just warning you Be very careful with ribbon cables. You are fragile. It's easier to attach the tapes to the iPad frame with the digitizer and screen removed. Do not remove the top cover of the strips until you are ready to install the digitizer. Be very careful when installing plugs. Be sure to test the screen and digitizer before applying adhesive strips. find that only half of the screen works, one of your plugs is not fully inserted into the socket. I speak from experience. The connector closest to the home button is for the bottom half of the screen. Exit toward the home button. The digitizer and display will open as shown in the video. However, if the ribbon cables seem too taut, lift them up, move them over the edge a little closer to the connectors, and they should lie down. Like I said, take your time, pay attention to the screws, and try not to get frustrated or rushed. In general, watch the video. You will have a more pleasant experience in fixing your iPad. Much luck!