Review on Daystar Heavy Duty Replacement Steering Stabilizer for Jeep JK Wrangler (2007-2017, 2/4WD) - KU01019, Made in the USA by Philip Latham

Fits my 2007 Jeep Wrangler JK. The diameter of the Daystar stabilizer tube is slightly larger than the factory steering stabilizer. A larger diameter may result in the end of the sleeve on the right not fitting properly in the bracket. No problem, just loosen the stabilizer bracket (4 nuts) and rotate it down slightly until the end of the bushing snaps into the fixed bracket on the right. In addition, a small bracket is welded to the nut of the right-hand fastening screw. Don't try to remove the nut. Turn the screw to loosen it and leave the nut in place. The tab prevents the nut from turning when the bolt is loosened. When assembling, screw the bolt into the nut. If you don't have a hydraulic press handy, use a vise to press the included rubber grommets into each end of the new steering stabilizer, then insert the metal inserts by hand. The total assembly time including cleaning was about an hour.