Review on Inverter welding machine Fubag IR 200 VRD 38900, MMA by Micha Spodymek ᠌

Name: Inverter welding machine Fubag IR 200 VRD 38900, MMA
Item: Inverter welding machine Fubag IR 200 VRD 38900, MMA
Rating: 5

June 20, 2023

Matches the description completely, very satisfied.

The video didn't load. I'm attaching a photo with the first 2 electrodes. Yes, by the way welding is sensitive to them. Monolith electrodes melt metal more strongly - the seam is noticeably wider. I made the handle from the belt short, so it seemed more convenient and did not get dirty on the ground.

But, probably, these are nit-picking . you can adapt to everything, the main thing is soft, chirping))) welding and the absence of spatter. Would I recommend this welding?. Yes!

Updated 3 years ago

Rating has not been changed

To supplement my review, I have attached some photos that show the highlights of my experience.
﻿

Pros

Good afternoon! Impressions are ambiguous. Advantages: 1) a large power reserve. Electrode 2mm current 40-45A, 2.5mm. 50 A. and this is at 210 V in the network. 2) the welding itself works very softly, there is absolutely NO spatter. And for this you can forgive EVERYTHING!

Cons

1) Adjustments are inaccurate. at 50A there is not enough current, at 51A you feel an incommensurable increase - definitely not 1A. If you put A more burns through the metal 3mm. Italian Blueweld 164 brews 2.5 mm at 75 A. Svarog also works at 75A. 2) no hot start. 3) anti-sticking works ambiguously. It does not turn off, but reduces the voltage. 4) the process itself is manageable, but requires constant monitoring. "Fired up" often not from 1 time. As the metal warms up, welding begins to burn through more. It is treated by interrupting or increasing the feed rate. On Blueweld, the seam is always stable - it does not burn through on hot metal, as if it is adjusting - but there are many times more splashes and you can only work in a welder's suit. 5) If you cook pointwise, no ice. Due to the lack of a hot start.