Review on 🔧 Motorcraft YH1752 Engine Motor by Eric Sharp

I installed it on my 2005 F-150. really easy to do. Took me about 30 minutes. All you need is an 8mm spanner and a screwdriver with an 8mm socket. Simply remove the bezel around the radio and heater controls. Just start on the top sides by placing your fingers between the dash and bezel and work your way down. He'll jump right out. Simply disconnect the top wire and bottom panel with everything connected to the heater controls. Then unscrew the 4 screws of the radio with a head of 8mm. Then take it out and turn it off. Then look for the actuator 3 shiny screws holding the hood door on the right side.