Review on 🚰 Enhance Your Plumbing System with Allstar ALL11081 Koul Tool Kit -6 AN to -10 AN Fitting/Hose by Robert Smith

Great and simple design that makes inserting braided hose into fittings painless! I've never tried making them without the Koul tool, but this tool was recommended to me by a mechanic friend who told me how much it helps. So when I bought a valve cover bleed kit that used -AN fittings and required me to connect lines, I bought this tool. There are videos on YouTube showing how to use this ingenious tool. I measured the length of the hoses, marked them with black tape (an important step in this process), used a 4" grinder with metal cutting discs to cut my lines (cut off the middle of the tape - the tape will stop the slipping of the Rope). supports and holds things together when the fitting is installed.) Put Cole's tool in a vise (it looks like plastic but it's a VERY tough resin - the material is STRONG), I got a touch of 5-30 Apply engine lubricant to the outside of the tape and insert the cord in a twisting motion. You may need to check that the line is fully retracted. It is recommended to use them in order not to damage the anodized aluminum fittings: http://www.amazon.com/gp/product/B008BF1VEK/ref=cm_cr_ryp_prd_ttl_sol_5), lubricate the threads of the fittings with a little oil and screw them from fittings.