Review on 💧 Waterproof Electric Position Terminals by RDEXP by Steve Hauck

One of the pictures in the product description is not an indication of what you will receive. The picture with the red and green wires labeled "6 Bit Waterproof Terminal Box" is not what is in the box. This picture shows 8 pairs of terminal screws for a total of 6. It also shows a terminal strip screwed to the bottom of the box, but there is no such fastener. If the wires aren't preventing it from moving to your satisfaction, then you need to tweak it. There are four plastic screws to attach the lid to the box and four machine screws to attach the box to the surface. Terminals accept up to 10 AWG stranded wire between the screw and side panel. Anything beyond that will be a problem. Connection continuity runs directly through the bus. So if you need to split or combine inputs, you need to install jumpers. The inlet diameter of the box is 10mm, which shrinks to 8mm. If you're not using all three inlets, just wrap something like tape around the unused cap before screwing it onto the sleeve to keep it watertight.