Review on 🔄 Synchronous Industrial Electric Turntable Cuptisserie Connector - AC100 127V by Tory Richardson

This is a really bad buy. Firstly, when asked to rate it, it asks me to rate 'clean' and 'warm', which leads me to believe that this seller has listed and changed a different item. that's due to reviews 🤔But let's discuss the topic. These arrived and I was confused. There's no direction and it's not very straight forward. Just a hint, those tiny black bead things are what they're waiting for to hold this whole contraption together. Spoiler alert: this is a very bad plan. They're going to fall apart because these things are coming out. Additionally, the arm that comes with the kit is made of non-standard sized PVC, making it literally impossible to find suitable connectors. I bought spliced 1/2" from a big store and just used an ungodly amount of PVC cement to hold them together. This worked fine but was a mess and unnecessarily complicated. Also do these arms come with a screw on hardware attached and sealed with some kind of glue? Well, those tiny screws will wiggle freely (and you won't be able to get a standard tool to tighten them yourself. Then that glue will heat up as you turn, breaking its seal and your mug will either fall off 🤦 🏼 ‍♀️Or stop spinning which will cause your epoxy to run down and ruin the cup.Ask me how I know that there is a 1/2" connector so I can use it as a solid 1/2"- Levers on my toggle switches and hopefully can reach the screws to tighten them (but I still can't) It's a waste of material, poor workmanship, bad design and big head screws merz Do yourself a favor and ONLY buy motors and watch a tutorial on youtube to learn how to make your own lever and lever connector It was a cluster and now I'm 2 circles in Re Monte. 🤦🏼‍♀️