Taozun Towel Bar Self Adhesive 21.65-Inch Bathroom Brushed SUS 304 Stainless Steel Bath Wall Shelf Rack Hanging Towel Stick On Sticky Hanger Contemporary Style Review

Worked perfectly for my kitchen remodel project. I wanted something to add a little 'something extra' to the SS farmhouse sink I installed in the cabinet I made for my wife's new kitchen and this worked out great! I temporally ran a 3/8" wooden dowel through the crossbar and bent a slight curve to mimic the curve of the sink and my wife loves it. Not only does it dress up the sink, but it adds a safety barrier to prevent scratches on the sink apron. The provided 3m tape hold very well. I'm sure

I wanted to mount two towel bars on the back of my bathroom door, and I wanted something that looked nicer than then an item that would just hang from the top of the door. The problem is that it's a hollow door so anything that mounted with screws would be tricky. So instead, I bought two of these bars and the results have been really great. It's been a month and there are no issues, the "stickers" used to mount the bars are very strong.

Got this to use in the bathroom in my RV Trailer. Wanted something that wouldn't require putting holes in the wall, and found this with the 3M adhesion. So far - it is staying up just fine. Will use it for light weight bathroom towels.

I opened the box, looked over the directions, and installed this towel bar in no time. It took me longer to decide on placement than it did on installation. Our shower has ceramic tile in it and the towel rod sticks to it very well. Installed it maybe 6 months ago or longer and it's still hanging. It looks very sleek, and nice. The rod in the middle of the brackets turns. This makes it easier to hang a wet towel on to dry. Love mine and highly recommend it.

This is the third towel bar I have purchased from this company, and the second one of this size. All were very easy to install, and the directions to do so were clear. Once installed and left alone for at least 24 hours, it has a very firm grip that lasts. They were installed inside a shower and have never fallen down. The first one is still on and in use after about 18 months and shows no sign of weakness. When installing, be careful to check that the bar is level before touching the wall…

We were skeptical about something that attaches with tape, but, by jove, it works well! Attractive, too. A nice find. Thanks for attention!

We recently got a larger refrigerator and had to remove a small divider between the stove and refrigerator. Our previous refrigerator had magnets all over it and a tool rack nailed to the divider. Since our new refrigerator has a stainless steel front, only the side of it is magnetized. I mounted this towel rack with the adhesive tape provided, and it does a great job of holding the kitchen towel. It sits right below the magnets and calendar.The towel rack has been up on the side of the…

I attached this to the bottom of our storage cabinet in the camper and it works great, easy to install and no problem with it staying in place. Expanded to the perfect lenght i needed,

I’ve had it for 2 years now. Still up and with no signs of coming off. No signs of wear either. Awesome purchase. Really recommend. I do wish they offered it with larger opening for the towel. Regular towels are fine. I gained some extra weight and I recently purchased an Xl towel. It takes a few extra seconds to get it through the opening. It still gets through but I don’t like my towel rubbing up against the wall. And my XL towel rubs up against it because there is not enough room. Still give

I liked that this towel rack is stainless steel and the 3M glue pad on the back of each mount sticks very well. I mounted it on a fiberglass tub surround and it looks very nice. This rack is on there for a very long time!

These are great! Put up a towel bar and two matching hooks on the walls of a fiberglass shower stall. It’s been 2 weeks and they are holding strong. Quality product with a brushed stainless steel look. You definitely need to measure and make marks with a level both vertically and horizontally for one side piece, remove the adhesive backing and mount it first. Then assemble the towel bar and the other side piece before removing the adhesive backing on that piece. Make sure it’s level and make…

I have tiled bath walks and was worried about harming my tile. I found these and haven’t been happier. They are easy to apply and hold extremely well.

I wanted to use this in my shower so I followed other reviewers' recommendations and removed the adhesive that came with the mounting hardware. I took it off using a spackling knife and Goo Gone. I then wiped it down with rubbing alcohol, and applied two Command strips to the back of each end. Be sure to use the "water" style Command strips since they're made for humidity. I live in Florida and was worried that this thing wouldn't hold because our humidity is so high. It has been a month since…

I like the easy install of this product. No holes in wall needed. I will be buying more to use in other rooms of my home. Love it!