Jack Pad Adapter Anodized Black Replacement For B-M-W 135 335 535 E82 E88 E46 E90 E91 E92 E93 E38 E39 E60 E61 E63 E64 E65 E66 E70 E71 E89 X5 X6 X3 1M M3 M5 M6 F01 F02 F30 F10(1 Pcs) Review

These are exactly what they say - aluminum jack pads for BMW/Mini. I can't complain about the quality, but after comparing these to a set of rubber ones I found that I prefer the rubber.With these you have to stop and check a lot when lowering the vehicle onto stands, to make sure these adapters line up right under the jack pad. With rubber adapters you can sort of shove the adapter into the jack pad and then lower the whole thing onto a stand without as much running around.

BLUF: Either buy the BMS version of these or use hockey pucks.I read a review that compared these jack pads to the ones made by BMS, and that review was correct.These pads (black) look like they fit the bill but are too short, so the base of the pad is what lifts the car, potentially damaging the jacking point bracket. Hockey pucks are better if you want to go the cheap route because they are softer than the jack point bracket and will deform before the bracket itself. If you want legit jack…

This adapter seems to be very sturdy,… even when it’s made of aluminum, the very little, also superficial, "dent” made it when you use it under full load with a smaller disc base of certain lift jacks… it’s only an aesthetic issue, it performs as it supposed to be and also fits perfect on the jacking point.As a particular note, fits perfect (wide, large and deep measure) on a BMW 2 Series Gran Tourer/Active Tourer (F46/F45) if you are looking for this application.

Saw others like this that were much more expensive. This is an affordable option to use on my MINI Cooper when I need to lift it with a jack. Not sure what material it is but they are of metal material that will not break over time. I recommend these if you need to jack up your car and don't want to ruin the jack up points on the car.

I have been looking for a these, and the Berman’s just aren’t available anymore. This fit like a glove on my 2013 BMW 335i sedan!

Very fast shipping, ordered Friday received Monday! Product works as intended for half the cost of similar items. Make sure to buy 2 packs, you’ll need 4 for a lift. Vehicle used: 2020 Supra.

I just used these to jack up a 2005 E46 and they worked great. They appear to be made of a light metal (aluminum?). They held the vehicle in place and look brand new after one use. I hope they last forever!

The item arrived the next day and was of a high quality. Definitely saved me from damaging the jacking points on my car. Highly recommended.

Does what its supposed to do. Presents a better interface for lifting via a circular pad floor jack than just the circular pad on the floor jack alone. Only to be used when using the lift points along the side either just behind the front wheel or in front of the rear wheel.

Fantastic for use with a urethane block on a car lift. I don't know how to use these on a single jack stand.But in my application, theyre perfect and worth ever penny.

Check your bmw s jack supports. Chances are they re busted. Replace them and get these just for the love of your car. That's my feedback.

I haven’t used it yet but I bought this for my BMW X5 so I can safely lift it for brake jobs and suspension maintenance. Based on looks, it seems to be very high quality and has a nice heavy weight to it. It is solid aluminum I believe. I have no doubt that it will work great. It fits perfectly in the jack pads jacking points under the car. When I eventually do use it, I’ll update if something bad happens. If I don’t update then this product is working fine and great.

I've used these several times and they work well. I had a 2001 BMW 540i up on four jack stands for about 2 weeks while getting the wheels powder coated and they held up perfectly. Might as well get four the first time so you'll be able to jack up the whole car.

These are essential for jacking up your BMW. Perfect thing to put between my floor jack and the receiver under the car. They're well-made and fit perfectly. I don't know why BMW insists on this jacking arrangement, but they do, so.

Got this for lifting my Mini cooper, fits perfectly in the lifting slot and adds a lot of confidence when changing the tires. You need to use a jack that has a wide lifting point for this to work so keep that in mind.

This slots right into the jack holes in my E93. One word of caution: be sure to take them out when you jack your car down. They do stick in the hole, but they will fall off when you drive off. I found that out the hard way and had to buy a replacement.

On my 2019 X5, these pads don’t bottom out in the raised part, they seat around the perimeter. I cut a piece of scrap vinyl as a spacer, from siding, about 1/16 in. thick, to be sure the raised part seats first. Just taped it on. I could see a slight gap at the perimeter. I believe the recess of the fitting on the car should bear the jacking force.

It fits a little loose in the jacking point but still does a great job. This aluminum jacking pad works much better than the poly ones.

Good quality. Sturdy. Indices confidence.Only qualm: it’s not a firm fit into the jackpads which means you have to line these up perfectly just before they make contact with the pad so hey actually slide in. Doable with a jack but I’d imagine would be even more time consuming on a lift

If you do your own car maintenance, these are a must to raise your mini up in the air. These are durable and fit perfect in the OEM lift points.