Review on 🔊 Edifier SS02 25.6 inch Wood Grain Speaker Stands - Pair, for S1000DB / S2000PRO/ S1000MKII, Hollowed Stands with Optional Sand Filling Tuning by Theresa Grieve

These coasters are really solid. they are heavy The center support is an inch-thick, solid piece of fiberboard (thick-walled hollow tube). You attach the top and bottom to the stand with eight screws. (four above and four below). There are no instructions, but they are not needed. It is pre-drilled with four pilot holes at the top and four at the bottom, allowing the screws to be screwed in easily but very firmly and strongly. After assembly, the stands resemble two concrete blocks. I thought I would have to attach the speakers to the stand, but you'll soon see that this isn't necessary. The color is slightly different from the Edifier S200 Pro speakers. The speakers are absolutely beautiful and the color is a bit lighter than the stands. The speakers are made of natural wood on the sides. The stands are thick fiberboard with a wood veneer (not as pretty as the speakers). But that doesn't bother me much, and still I think this is the best stand I could find for these speakers. The top and bottom plates have a nice taper (not just a cheap block like the cut out one, but very stylish) and the speaker sits on the top plate like it was made for it, because it was. They have the Edifier logo on the front of the bottom plate. The Edifier S2000 Pro is a great set of powered speakers and they work great with these stands.