Review on YESKING 20 200In Lb 2 26 22 6Nm Dual Direction Adjustable by Julius Lito

This set is housed in a durable hard case making it safe and easy to store and transport. Two scales are supplied: 20-200 in-lb/2.26-22.6 Nm and a certificate of calibration with an accuracy of +/- 3%. They recommend a recalibration after 5000 cycles or 12 months. There is a limited but sufficient bit set (T20, T25, T30, H3, H4, H5, H6, H8, H10, H5-50ML) and a handy 4 inch extension. Note that out of ten bits only H3, H4, T20, T25 and T30 are marked. The rest are unmarked, although their slot is marked in the case. The instructions are easy to read and helpful. The key is easy to install. Since I use a scale in pounds, I had to convert foot-pounds back to pounds many times to use the wrench. For example, if I need 5 foot-pounds, I set the wrench to 60 inch-pounds (x12). I mainly use this wrench to properly tighten scopes and accessories. Using my own ¼" bit sets allows me to increase and expand the use of this wrench. There is a small compartment in the pen that isn't mentioned. It's too small to fit any bits. Overall I rate it as durable , reliable and inexpensive. Costs money.