Review on Aquarium Chiller Hydroponics System Axolotl by Michelle Carey

Has exceeded my expectations so far! 1/3 HP Cooler Cool the tanks via a heat exchanger and connect the circuit via an auto AC condenser to a thermostatically controlled exhaust fan and tent heat exchange pump, and then cool the blocks on the grow lights, further increasing thermal efficiency. This unit solved my tent cooling problem and the peak power is only 325W so it is very efficient and performs better than I expected. I install an air duct behind the radiator with an exhaust fan to further improve heat management. This solved many problems: *Heat management in the grow tent *Cooling *Cooling LED strips (to prolong the lifespan of the LEDs and improve the cooling efficiency of the tent) I put some quick connectors on the water inlet and outlet for ease of maintenance. Upon installation I removed the radiator I was using for heat exchange and connected the lines to this cooler, flushed and bled the lines and ran the lines and it immediately put an end to my struggle with the heat load of the grow tent. It has enough cooling capacity that I could add a cooling tent for spinach and lettuce. It was easy to install, no leaks. I encountered an error message (it showed EE). I turned it off, cycled it, looked for a reset and couldn't find it, and scoured the internet for clues. I see people mentioning the "three lanes" error but no EE. I ended up opening it up to check all the connections and fittings and it turned out that the core probe connector needed to be reinstalled. I closed the device, turned it on and great success! The error never reappeared and has been working flawlessly ever since.