Review on 🛠️ Enhance your DIY projects with the BLACK+DECKER BDEDMT Matrix Driver! by Adam Sterlinski ᠌

This device is suitable for small jobs around the house, when different tools are needed, but it is rarely used. There will be a lot of tools taking up little space. Nozzles are cheaper and more compact than a standalone tool. Used as a repair tool. All these nozzles are of course a big compromise. Now more. Used a screwdriver. Unlike a normal Shurik, the speed is only one, the second. Screwing screws is not very good. I drilled chipboard, porcelain tiles, mixed the paint, it was fine. Enough power. Lobzik, more or less. No oscillation, does not blow dust off the cut line, very inconvenient. I assembled the kitchen, sawed shelves, a 38mm countertop. Not suitable for regular work. Circular saw, this is generally incomprehensible crap. The disk walks 1-1.5 mm along the axis. At first sawed normally, but quickly began to lead to the side. I thought the disc, put a new one, still leads. sawing exactly is impossible, if you try to drive along the line, the disk stops due to skew. I took it for a laminate, a kitchen, but in the end I switched to a jigsaw, even though it takes them longer to cut. The only joy is that now I know that the motor does not burn out if it works with overload or the nozzle jams (at least for a short time)