Review on 🔥 High-Powered Scorch Torch Skyline Triple Jet Flame Butane Torch Lighter for Cigarettes and Cigars + Punch Cutter Tool - Gun Metal Finish (Style 2) by Eddie Tyson

In the foreword I want to say that I know how to bleed the burner before filling, I buy butane 10 times, I knows how to fill the butane lighter upside down with the valve open and with this model you want the gas to be in the off position when filling, which should be apparent from the mechanics. And finally, I know that after filling, you have to wait 10 minutes for the gas to stabilize before igniting. I'm not actually a bot, and I'm definitely not a competitor. Problems I run into regularly (more than half the time): • Never lights up on the first try (and I mean never forget it more than often for that); • Small tank; • The flame will crackle at all but high flame levels, but you are unlikely to want to use this setting unless you are welding; • The flame goes out as long as gas is supplied; • Burns for 3 seconds and then the flame goes out by itself; • The gas stops flowing even if it is not turned off, it lights up again without stopping the gas, but goes out after 3 seconds; • Best scenario, but listed last because it's the least likely scenario: the flame goes out but the gas is still flowing (just light the flint again and there's a good chance you'll get a good flame that burns). There's no catch (e.g. you can only use it on certain sellers) then I can keep mine and give it to friend-foe. ** A good bag isn't really a big part of the benefit as it doesn't protect it from whatever hammer you intend to use on it.