Review on 🔧 DEWALT DCF887N Impact Driver with Brushless Technology by Michal Adach ᠌

Convenient to work. Bits are fixed conveniently, it is not necessary to delay the cartridge to install them. With confidence, he screws in powerful fasteners, even rolled one bit, because the bit was not designed for such a load. Need special for impact screwdrivers. Use the correct and high-quality consumables, and the pleasure of work is guaranteed. You can also use pen drills, drills without problems. But with the use of a quick-clamping chuck with Lewis drills, even at 12, it does not cope well, it takes a long time, for this you still need a powerful drill-driver. 3 speeds come in very handy, at the first speed it turns out to screw in small fasteners very delicately, it’s not scary that you overtighten and the shocks do not turn on immediately, but only a second after you feel the load. At 2 and 3 speeds, there are already more serious fasteners, respectively, where the shocks turn on immediately with an increase in load. I tried to unscrew the nuts from the wheel of 16 radius - it unscrews in 2-3 seconds, despite the fact that with the help of a balloon it turns out to be unscrewed only from the foot. I will add that not all disks can be unscrewed, some turn sour be healthy. In general, the tool is excellent. 2AC911A4