Review on 🚰 Pro-LevelSense: WiFi-Connected Sump Pump Alarm with Internal Rechargeable Battery, Real-Time Online Level Monitoring by Dustin Barry

Lots of options with this unit. I bought it for a drain pump monitor but it can do so much more. The package includes water level sensors, a float switch and a wet floor. Built-in sensors of temperature, humidity, power, and also - the monitoring station will warn you about the loss of Internet connection. The monitoring station web page you access provides graphs of monitored information so you can view trends and make decisions to set alert points. So this thing is the monitor of the whole house. When the heat disappears in winter - a low temperature alarm, in summer the air conditioner is turned off - a high temperature alarm. Concerned about mold - humidity above 55% - sounded the alarm. In addition, it has a built-in rechargeable backup battery. Connecting was easy - note that my Wi-Fi IP turned out to be 192.168.244.1 instead of the documented 192.168.4.1, so run ipconfig on the command line if using Windows to configure the device, to determine the first three numbers. Your computer will be assigned an address on the same network as the sensor. Therefore, use the first three digits followed by .1 to connect to the configuration web page. Good quality - the green circuit board sticking out below is where the external sensors connect. I'm sure there are creative people out there who will come up with other sensors to connect to. The float switch and wet bottom connections are looking for an open/close. Alarms can be set for each condition. So you keep an eye on empty and dry. Or connect it to a window or door sensor to use as a burglar alarm. Who knows. What to play next. I think I'll buy another one.