Review on Performance Tool 60507 White Paint by Justin Puranik

Product Name Purchased/Listed: Wilmar 60504 Tread Depth Gauge Product Name on Received Packaging: Airtight 60504 Tread Depth Gauge Made in: China Website on Packaging: wilmarcorpDOTcom Price: $4.77 (Prices 2.53 + 2.53 h&h) Seller: Hires Automotive Date of purchase: 03/15/15 Date of arrival: 03/20/15 Delivered: CA Recommendation: Highly recommended. : -prop 65 warning. - Copyright 2010. Measured in 1/32" and 1mm increments down to 1"/25mm. Pros: + looks like measurements are consistent and accurate when measuring the --top-- of the tire in the --inner-- groove of the tread + has a hexagonal analog vertical reader with 3 consecutive sides in millimeters and 3 consecutive pages in 32 inches. + a function for non-commercial vehicles and easy to understand operation and reading in just a few minutes of play. + two flanges to position the gauge evenly over the --inner-- groove from the surface of the tire, for example to pull it out from under the tire because the fender makes it difficult to read. *Of course, for easier reading, leave it in place if you can see it (mirror and/or flashlight may be required) - I'd happily leave it in the glove box, but I'll probably secure it with the rest of my belongings. Less commonly used tools in the cargo area or perhaps not at all in the vehicle as the gauge pin could be bent or the sensor damaged if the gauge stick is pushed down exposing the pin and then another object applies weight to the pin. A properly designed case will also solve this problem. Usage Tips: 1) Remember to place it over the inner groove, ie not over the outer or innermost groove between tread sections; Also place it on the top of the tire so the indicator faces towards the blue and finally do not place it on the tire change indicator ball in the groove (feel with your finger or something or confirm visually). If you don't do all of these things, you probably won't get accurate readings, and if you don't do any of them, you definitely won't get accurate readings. 2) To read the display, look for the dash next to the number. on the same surface as directly above the top metal edge of the gauge. If of the three sides you use (metric or imperial) it's still about halfway between the lowest visible bar and the bar below, you might end up with, for example, 4.5/32 in. (or 9/64 in ) to have. ) if you do not feel like rounding, i.e. you are neither a pessimist nor an optimist. top protector. My use: I seem to be able to flip the sensor on its side and get my hand well out of the hoop to read it close to my tired eyes with no perceptible loss of accuracy. This sensor is everything I wanted, less clutter, for the price I wanted. Recommendation: Highly recommended.