My headlight went out after installation just over a year ago. I've wanted to try a set of LED lights for a long time and gave them a try. The LED bulb kit comes with a couple of zip ties, installation instructions for all your bulbs (you'll need to find the instructions for your bulbs), small (and I mean TINY) gloves to prevent oil from getting on the bulbs from your hands. . It's plug and play. No additional adapter required to avoid flicker or interference with other tools. To install it on the charger I just had to remove the filter box. There is some difficulty accessing the lamp housing but with patience and care I was able to remove the sealing cap and gain access without putting the car on ramps/jacks or removing the inner wheel arches. Once the old bulbs are removed, installation is pretty easy. Insert the LED lights into the lamp housing and connect the car/light connector to the new LED lamp. Then carefully place all the wires and the canbus box inside the case and set the sealed cup in place. I was concerned that the lamp with fan, the cable coming from the lamp, the canbus box and the car plug would not fit in the sealing cup, but I went through it without any problems. Now to my minor installation issues. When screwing a new LED light into the housing, the light itself detached from the adapter ring around it. It took a minute to pull it out and see why it came loose. The adapter ring and the lamp itself are two separate parts. Find out! I was able to reattach the ring to the lantern and successfully fit it into the housing, keeping the lantern secure. One of the lights didn't work after I installed it. I've read the instructions and one of the troubleshooting suggestions says to rotate the connector and plug it the other way. It's almost like you're trying to connect a USB cable, but that's not the case. With them, however, it kicks in on its own, but works only in the right position. I did this and the light worked. Remember that. I thought the light was broken and got annoyed. After I calmed down, I decided to read the instructions and noticed this as a possible reason. Here it is. They work and are very bright! I deducted one star because the flashlight and adapter ring were separate pieces and fell apart after the ring was attached to the flashlight body. I was able to fix this easily in my situation but may be problematic in other vehicles or scenarios.
Front LED Turn Signal Light Compatible With 2007-2017 Jeep Wrangler JK | LITEWAY Fender Side Marker Parking Lights
50 Review
BRISHINE 300LM Canbus Error Free T10 LED Bulbs - Pack Of 4 Extremely Bright 194 168 2825 W5W, 6000K Xenon White, 9-SMD 2835 LED Chipsets For Dome, Map, Door, Courtesy, And License Plate Lights
43 Review
LEDKINGDOMUS 44Mm Festoon LED Bulb, Bright White Interior Light For Car Dome Map, 12 SMD 3528 Chips, Rigid Loop, Compatible With 561 562 567 564, Pack Of 4
36 Review
10 Pack BRISHINE 194 LED Bulbs - Extremely Bright Ultra Blue 5630 Chipsets For Car Interior Dome Map Door Courtesy Trunk License Plate Lights
40 Review
Pack Of 2 TMH 6 Inch Oval White LED Lights For Truck Trailer With Reverse Lamp, Turn Signal, Side Marker And Tail Functions - Surface Mount, Ideal For Trailers, Buses And Vehicles, 12V DC
25 Review
XPCTD Upgraded LED Fog Lights Passing Lamps For Dodge Ram 1500 2500/3500 2002 2003 2004 2005 2006 2007 2008 2009 Durango 2004-2006 Truck Chrome
37 Review
Enhanced 3Rd Brake Light For Ford F250 F350 Super Duty Trucks: LED Tail Cab Cargo Lights & Stop Light Compatible With F450 F550 And 1995-2003 Ranger Models
30 Review
1999-2002 Chevy Silverado/Tahoe Headlight Assembly - 2 Year Warranty!
27 Review