Review on 🔊 SANUS Sonos Arc Soundbar TV Mount: Adjustable Height & Depth for Dolby Atmos | Universal Compatibility with SANUS & Other TV Mounts | Easy Assembly - OSSATM by Tay Fair

I use a SANUS wall mount for my 65 inch TV. This soundbar mount fits between your TV and the original TV mount. . It's about 22mm (7/8") thick and fits the bottom two holes of the original bracket. It comes with gaskets for the top two holes. It comes with a large set of longer screws as your original mounting screws probably aren't long enough when the soundbar mount is clamped in. I installed this on a Sony 900h and unfortunately none of the supplied screws fit, the supplied 30mm screws were too short and the supplied 40mm screws were too long. So I shortened the 40mm to 35mm with a dremel. Just be prepared or take a trip to the hardware store. I really like that you can raise/lower the soundbar to fit it close to the TV. You can also move it a few inches to control how far it extends in front of the TV. This is a great feature as the bow has a microphone as well as Atmos speakers that turn on. My wife was very pleased with how elegant the ark looked under the TV. Note that adding this soundbar mount may limit the angle of the TV if you have a flat TV mount. In my case I lifted the TV to put the speaker in the best position, while the soundbar mount touches the wall. So I can't tilt the TV down anymore. Luckily I have enough tilt to be able to comfortably watch TV while seated. However, if your TV is mounted very high, this could be a problem for you.