Many reviews have mentioned that the resulting gauge will not read zero. The product manual says the gauge can be adjusted by removing the cap, but doesn't explain how. I received mine today and in fact the sensor wasn't at zero. After careful inspection, I was able to remove the cover and zero the sensor. Then I compared the pressure at 15 with a manometer. Both show almost 15 inches. close enough for me First remove the rubber cover from the back of the sensor. It fits well but will come loose. edges of the plastic cover and gently pry it out of the metal case. After that you can access the adjustment screw on the front of the sensor. Choose a flathead screwdriver that gets as close to the screw as possible since it will move. Reassemble the sensor. The plastic cover snaps back into the metal case, but some alignment and care is required. solid construction and I expect it to be just great. The large dial, rubber case, and built-in hook are all plus points for my needs. I hope this helps those who have purchased one from scratch or are hesitant to order due to this issue. Paul
Autoscanner for car diagnostics Rokodil ScanX Pro, OBD2 scanner
29 Review
Upgrade Your Car Diagnostics With 16 Pin OBD2 Extension Cable Splitter - Male To Dual Female Y Cable - 50CM
17 Review
Autel AP200H OBD2 Scanner Dongle - Wireless Bluetooth Code Reader with Health Status Reports - Diagnostic Tool for Engine, Transmission, ABS, SRS - OLS/BMS Resets - All Vehicles (Android/iOS)
11 Review
Vgate ICar Pro Bluetooth 3.0 OBD2 Code Reader | Scan Tool For Torque Android To Check Engine Light & Car Faults
19 Review
DVR 70MAI Dash Cam Pro Plus+, black (A500S), black
87 Review
Xiaomi Mijia Ratchet Screwdriver 16 in 1 Screwdriver with Interchangeable Bits, 10 pcs, Black
22 Review
Cordiant Winter Drive 2 255/55 R18 109T
33 Review
Xiaomi Mi x Mijia Wiha Precision Screwdriver Set (DZN4000CN), 25 pcs
34 Review