Review on JCHL Cargo Tie-Down Anchors: Heavy-Duty 2 inch Black Steel V-Ring Bolt-On Trailering Accessories for Trucks, Trailers, and Warehouses by Chris Smotherman

Perfectly sized bolt holes for 2019 Toyota Tacoma. Drilling is not required. You will need a T55 Torx socket for the bed bolts. I found a $2.78 branch at my local "orange big box national hardware store everyone hates". Visit their website to find the exact island and bay so you don't have to guess and ask someone who knows less than you. Go to the hardware store whose website has the most items in stock. If they show one or two in stock, they're probably lost already. There is a large washer on the bed screw that needs to be removed and reinstalled after you put these anchors on the screw. To remove the factory washer, you must grind down the locking grooves on the bolt itself. This can easily be done with a Dremel or even a regular file if you don't mind it taking a little longer. Using my Dremel, one bolt took less than a minute. After removing the washer, install these anchors flat side down and reattach the factory washer (fold the anchor). Then just install the screw on your bed. The torque spec for the particular bed I found online was 50-60 ft.lbs. You can find a lot of information about this mod online at tacomaworld.