Review on 🔆 Top-Performing 3" LED Pods: AUTOSAVER88 2pcs 84W Quad Row Spot Lights by Douglas Berry

Mounting hardware on tractor should include a pair of locknuts and 2 additional washers. It is best to install before attaching the bracket to the tractor. I had to use a hacksaw blade with petroleum jelly to hold the nut in place so the bolt could be screwed in. Also, they either change the design or provide a thin wrench to hold the nut while turning the bolt. It would be better if the nuts, which are part of the rear support assembly, were notched on one side to prevent loosening. Time will tell if it weakens. A little creativity using a cord from an old vacuum cleaner that I cut off before throwing away made a very good pair of insulated two wires needed for the wiring along with a simple toggle switch from the HW memory to the hot wire that on which was deployed Tracker has completed the installation.