Review on 🔧 Danco 80842 Universal Medium Canopy Handles with Chrome Finish by Chuck Hernandez

1. Adjust the hood handle so that you can install the screw to prevent the hood from falling off the splines of the mixer shaft ::: Turn the 3 screws slowly by no more than 2 turns and facing the center of the provided lock, keeping the center screw hole always visible by turning the provided lock screw by screw until it is secure and your screw hole is still visible. Then put a canopy over the lock and tighten the bolt so it doesn't fall off the stem serrations.2. A Frequently Asked Question: What to do if the previous flashlight stem screw is lost? Well you can go to a hardware store to buy one to keep the dome from falling off the stem tips or use MacGyver's solution as all you need to do is keep it from falling off the stem splines as it works great by rotating the splines when they are in place with no screw. A. A simple fix is to put some silicon sealant or lube etc around the lock from the kit and then glue the hood in place to let it dry overnight and now your job is done except that You put the screw cap on the blank front panel of the canopy. DO NOT use construction glue as it is not needed and you will never be able to take it apart again. lol. The old 40 year old pool sheds have been replaced and they look great and work great. 1 has a screw and 2 has silicone but you can't tell them apart as everything works great even if you don't go to the hardware store for a screw. rzunimag.