Review on 🔑 Key Fob Keyless Entry Remote for Toyota Tundra Celica Echo FJ Cruiser Highlander Prius Rav4 Yaris/Scion xA xB (HYQ12BBX HYQ12BAN) by Jason Melvin

The instructions on their website didn't work on my 2005 Sequoia. Tech support said you need to find a locksmith. Eventually I did a quick google search and it worked. There seem to be a lot of them, but they were pretty easy to follow. Free Toyota Sequoia 2005 Keyless Entry Remote Step-by-Step Programming Guide Before using this programming guide, make sure you have this important information on the back of your remote. FCC ID: HYQ12BBX Manufacturing Part Number: 89742-35050 Canada Part Number: NA Programming Notes: Obtain all remote transmitters for this vehicle. Programming instructions step by step: Start with the ignition key removed, open and unlock the driver's door and make sure that all other doors and the trunk are closed. Insert the key in the ignition lock (do not turn) and remove. Complete these steps within 40 seconds. A. Operate the power door lock rocker switch on the driver's door to complete 5 lock/unlock cycles, starting with the lock. Use a steady pace and try to do about one cycle per second. (1 cycle = 1 lock and 1 unlock). Close the driver's door and then open it. Complete these steps within 40 seconds. A. Operate the power door lock rocker switch on the driver's door to complete 5 lock/unlock cycles, starting with the lock. Use a steady pace and try to do about one cycle per second. (1 cycle = 1 lock and 1 unlock.) B. Insert the key into the ignition cylinder. C. Turn on the ignition (just don't start the car, DO NOT start) and then turn it back to the OFF position. D. Turn on the ignition (just don't start the car, DO NOT start) and then turn it back to the OFF position. E. Remove the key from the ignition switch. Within 3 seconds, the electric door locks should automatically engage, indicating successful entry into programming mode. Return to step 1 if the locks are not working at this point. If so, go to step 7. Complete these steps within 40 seconds. A. Simultaneously press the lock and unlock buttons on the remote control for 1 second. B. Immediately after releasing the lock and unlock button, press the lock button separately for 2 seconds. The door locks should operate once within 3 seconds, indicating successful programming. If the door locks do not work or work twice, repeat steps A and B, your remote control will not be accepted. C. Repeat steps A and B in step 7 for each new transmitter. Close the driver's door. Test all remote controls. Programming complete. If this programming guide helped you save time and money, consider sharing our site with your friends and family so they can do the same. If you are having trouble programming the remote you ordered from us into your vehicle, please contact us at support@northcoastkeyless.com.