Clean optics at an unbelievable price. Wanted to buy OEM but why spend another $50 I don't need. Of course, there are small gaps at the bottom (see image), but you really need to look at this. Tools needed WITHOUT DISASSEMBLING THE REAR WHEEL: - Flathead screwdriver, Phillips screwdriver, Phillips ratchet bit, medium ratchet bit to attach a Phillips bit and push pin (e.g. for a cork board) to make room for the screws. Can be done in about 25-45 minutes. You even have to use all of the hardware, as the rear tires already have some plastic Phillips head screws that you can easily reinstall once removed. Rotate the front wheels for easier access. Use the pin to open the holes. for easier opening, removal, then aligning the fender and screwing it back on. The hardest screw to get out is on the inner wheel wells of the rear tires (shown), but you can pull it out with a ratchet and Phillips bit to remove it and read this after the fender is aligned became. Hope this helps 🙌
SuperJump Trampoline with SuperJump 8ft (244 cm) net and ladder
29 Review
Nokian Tires Nordman RS2 SUV 225/60 R18 104R winter
32 Review
4WD ORCISH Recovery Traction Boards Tracks Tire Ladder For Sand Snow Mud - Set Of 2 (2Nd Gen Bag + Mounting Pins, Black)
39 Review
Cordiant Road Runner 195/65 R15 91H summer
24 Review