Review on 🪟 Dorman 749-820 Front Driver Side Manual Window Regulator for Toyota Models by Trey Michaels

Excellent product. Remove door fittings (door closer trim, armrest); Remove the window regulator handle (check IH8MUD.com for instructions); Remove the door's skin with plastic car tools (oddly enough, they're sold here at Revain); Remove the vapor barrier, save and set aside. Lower the window completely. Pull out the head 10mm and unscrew the screw holding the window closest to the hinge. Raise the window until you see another 10mm window bolt in the access hole at the top of the door. Run a piece of tape from the outside of the window glass to the inside of the window glass (if you have tinted windows, hold on to the metal at the top of the window) [this will hold the window glass in place]. Remove the three screws that secure the crank mechanism and the two screws that secure the small outlet assembly. Install window handle. Turn the new window handle until it stops and CAREFULLY lower the window glass until it stops. Mount two locking bolts and you're done! Install door panel in reverse order.