Review on Enhance Your Car Security with Keyless2Go Replacement Keyless Entry Remote Car Key Fob (2 Pack) - FCC HYQ12BBX HYQ12BAN, 4 Button by Everald Mendez

Excellent quality + easy online instructions. The following worked for my 2006 Toyota Sequoia: 1. Make sure all doors are closed2. Open the driver's door3. Insert the key into the ignition switch and then remove it4. Press LOCK and UNLOCK on the car door lock switch 5 times at 1 second intervals.5. Close the driver's door and open it again6. Press LOCK and UNLOCK on the car door lock switch 5 times at 1 second intervals.7. Insert the key in the ignition lock8. Turn the ignition ON, then turn it OFF again (DO NOT start or crank the engine).9. Remove the key from the ignition lock10. The door locks must rotate to confirm entry into programming modea. AVALON – Press the LOCK button on the remote control for at least 1 secondb. ALL OTHER VEHICLES - Simultaneously press and hold LOCK & UNLOCK for 1.5 seconds; Then press and hold LOCK until the locks work11. The locks must be pressed once to confirm the programming. If they repeat twice, programming is not complete12. Repeat the button procedure to program the remaining remote controls. 13. Close the driver's door. test charts.