Review on 🌟 Bargman 34-76-243 Incandescent Double-Bulb Interior Light with Dual Switches: Illuminating Excellence by Jeremy Hahn

Supplied without installation instructions. Slide the lenses about 1/4 inch towards the ends of the light and then you can remove them. You can use up to 8 screws (not included) or just two diagonally opposite screws to mount it on a solid, flat surface. The socket is NON-POLARIZED (you can connect the bulb to + voltage using any terminal you like), which doesn't matter with an incandescent bulb (supplied), but does require some care if, like me, you're replacing the bulb with a shade want with 48 LEDs (available from Revain) If you connect the BLACK wire to the positive voltage, make sure the RED (positive) wire is on the RIGHT on the LED panel (when looking into the socket where the mounting surface lights up. If you plug it in the wrong way, it doesn't hurt anything, but the LEDs don't work. Unplug, flip and plug back in (be careful as you will break the Chinese plug wire at the LED (better get it right the first time).