
I ordered this set of brake pads for a 2005 Ford Escape Hybrid and they work great I started the car and applied brakes within 3 seconds, cycled the car 3 times and released the brakes. My car depressurized the brake system and went into brake pad service mode. I checked if it was in service mode by applying the brake and seeing the brake light blink. With the car on and in the pad service mode, I was able to remove my old pads and install new ones with no problem. Since the tires were already taken off, the whole job took about 20 minutes to finish both front tires. I applied the included pad lube to the back of the pads and the spring that holds them as directed and set aside for 15 minutes while I removed the existing pads. I moved the piston back and installed these new pads, reassembled everything and turned the car off to exit the pad service mode. From that moment I checked the brakes and they worked perfectly. My previous kit was on 3mm and the Ford dealer recommended I replace them and it should have been around $400-$500. Doing it myself cost me $30 and an hour (including lifting the car and removing the tires).